;=============================================================================== ; ; ATI pre-processor parameter file ; produced by script ; at Thu Jan 8 16:50:26 PST 2004 by ; for AIRSAR (c Band) data set at0036 ; located in /mnt/d01/airops/at36out ; ;=============================================================================== ; include hpp file: /mnt/d01/airops/at36out/at0036.chpp ;=============================================================================== ; ; header processor parameter file ; produced by script /u/sartor0/airops/ati/hp/scripts/hp ; at Thu Jan 8 16:38:04 PST 2004 by ; for AIRSAR (c Band) data set at0036 ; located in /mnt/d01/airops/at36out ; ;=============================================================================== ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpInit ; executables used for header processing tools = /u/sartor0/airops/ati/Tools/bin ; utility executables path pick = /u/sartor0/airops/ati/Tools/bin/pick ; general-purpose data extraction byteSplit = /u/sartor0/airops/ati/Tools/bin/byteSplit ; fast specialized data extraction 2bin = /u/sartor0/airops/ati/Tools/bin/2bin ; ascii-->binary conversion filt = /u/sartor0/airops/ati/Tools/bin/filt ; median filter stats = /u/sartor0/airops/ati/Tools/bin/stats ; statistics tool pickmocomp = /u/sartor0/airops/ati/Tools/bin/pick sym=moc ; pick applied to motion files hppath = /u/sartor0/airops/ati/hp ; location of hp top folder calpath = /u/sartor0/airops/ati/hp/data ; folder of cal parm files scripts = /u/sartor0/airops/ati/hp/scripts ; location of hp scripts bin = /u/sartor0/airops/ati/hp/bin ; location of hp C++ programs hp = /u/sartor0/airops/ati/hp/scripts/hp ; main executable hp_init = /u/sartor0/airops/ati/hp/scripts/hpInit ; parameter initialization hp_sub = /u/sartor0/airops/ati/hp/scripts/hpSeparate ; extract sub-comm data hp_frm = /u/sartor0/airops/ati/hp/scripts/hpFrame ; IGI frame time-tags hp_hw = /u/sartor0/airops/ati/hp/scripts/hpHW ; extract honeywell data hp_cal = /u/sartor0/airops/ati/hp/scripts/hpCal ; get calibration file for this data hp_par = /u/sartor0/airops/ati/hp/scripts/hpParms ; get miscellaneous parameters hp_hwf = /u/sartor0/airops/ati/hp/scripts/hpHWf ; median filter honeywell data hp_hwp = /u/sartor0/airops/ati/hp/bin/hwProc ; clean honeywell data hp_mxr = /u/sartor0/airops/ati/hp/bin/moxRef ; peg data to ref track hp_mxa = /u/sartor0/airops/ati/hp/bin/moxArm ; add leverarms hp_mxs = /u/sartor0/airops/ati/hp/scripts/hpMxStats ; statistics on motion data ; data run pwd = /mnt/d01/airops/at36out ; folder from which scripts were executed inpath = /mnt/d01/airops/at36out ; folder for the aux data tag = at0036 ; name of all associated files for this data set band = c ; band (l,c,x,p) of operation ; paths and filenames out = /mnt/d01/airops/at36out ; folder for hp output hpp = /mnt/d01/airops/at36out/at0036.chpp ; this file (Header Processor Parameter file) aux = /mnt/d01/airops/at36out/at0036.caux ; aux file ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpSeparate sub = /mnt/d01/airops/at36out/at0036.csub ; subcommutated header fix = /mnt/d01/airops/at36out/at0036.cfix; aux file with missing lines stripped year = 2003 ; year for this data take ; info for /mnt/d01/airops/at36out/at0036.caux and /mnt/d01/airops/at36out/at0036.csub auxreclen = 128 ; length (bytes) of the aux records subdatalen = 32 ; length (bytes) of mux data in each aux record subreclen = 4096 ; length (bytes) of the subcomm records subrec0 = 38 ; aux record for first subcom record minfsize = 11833 ; subtract hdrlen and / 2 to get good bytes maxDataBytes = 5852 ; number of bytes to use in each raw data rec nframes = 84001 ; # records in aux file (one per xmit pulse) framestart = 17789274 ; frame count of first aux record framestop = 17873274 ; frame count of last aux record missing = ; missing lines (0-offset from first frame) ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ; ; calibration parameters from cal-2000-07-25 ; ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ cal = /u/sartor0/airops/ati/hp/data/cal-2000-07-25 ; cal parm file used jDay = 109 ; Julian day of year(2003) of data acq. acqDay = 8503 ; gps day of acquisition gDay = 7506 ; gps day of cal file (cal-2000-07-25) ; ; calibration parameter file ; ; antenna lever arms are in the ijk coord system, ; i.e., i is forward, j is port and k is up ; differential delays lhh_rangeDelay(m)=0.0 lhv_rangeDelay(m)=0.0 lvh_rangeDelay(m)=0.0 lvv_rangeDelay(m)=0.0 lfa_rangeDelay(m)=0.0 cfa_rangeDelay(m)=0.0 pss_rangeDelay(m)=0.0 ; phase offsets laf_phaseOffset(rad)=0.0 lfa_phaseOffset(rad)=0.0 laa_phaseOffset(rad)=0.0 lff_phaseOffset(rad)=0.0 caf_phaseOffset(rad)=0.0 cfa_phaseOffset(rad)=0.0 caa_phaseOffset(rad)=0.0 cff_phaseOffset(rad)=0.0 ; L-band antennas lever_lt(m) = 0.47 1.18 1.49 lever_la(m) = -0.0676 0.4822 -0.1632 lever_lf(m) = 19.6876 0.3878 -0.1268 length_lf(m) = 1.505 length_la(m) = 1.505 length_lt(m) = 1.505 ; C-band antennas ; based on anhua's email 31 Jul 2000 lever_ct(m) = 1.88890 1.72601 1.91212 lever_cb(m) = 1.87212 0.67711 -0.35411 ; lever_cs(m) = 0.55 0.67 -0.09 length_ct(m) = 1.3 length_cb(m) = 1.3 ; length_cs(m) = 1.3 lever_ca(m) = 0.5509 0.6757 -0.0882 lever_cf(m) = 2.4691 0.1243 -0.7018 length_cf(m) = 1.3 length_ca(m) = 1.3 ; P-band antennas lever_ps(m) = 2.48 0.58 -0.26 ; only one antenna for both channels length_ps(m) = 1.65 ; center frequencies fconv_p_20(Hz) = 450.0e6 fconv_p_40(Hz) = 450.0e6 fconv_l_20(Hz) = 1.26e9 fconv_l_40(Hz) = 1.26e9 fconv_l_80(Hz) = 1.3025e9 fconv_c_20(Hz) = 5.31e9 fconv_c_40(Hz) = 5.31e9 elecdelay(s) = 32.5e-6 ; IMU calibration ; (the biases are subtracted from the IMU data) ;rollBias(rad) = 0.0089623 ; 0.5135 degrees rollBias(rad) = 0.0 pitchBias(rad) = 0.0 yawBias(rad) = 0.0 ; phase calibration laa_rangeDelay(m)=0.0 laf_rangeDelay(m)=12.0874 ;lff_rangeDelay(m)=25.44 lff_rangeDelay(m)=0.0 csb_rangeDelay(m)=3.3 css_rangeDelay(m)=0.0 caa_rangeDelay(m)=0.0 caf_rangeDelay(m)=2.6208 ;cff_rangeDelay(m)=5.34 cff_rangeDelay(m)=0.0 ctt_rangeDelay(m)=0.0 ctf_rangeDelay(m)=0.0 cbb_rangeDelay(m)=0.0 ; use crd for this ctb_rangeDelay(m)=-2.013 ; ctt_rangeDelay(m)=-3.63 ; based on anhua's email ; Common range delay measurements ; currently, the nomenclature is: ; crd_$band_$bw ; where $band is the frequency [p,l,c] ; and $bw is the bandwidth in MHz [20,40,80] ; ; the crd parameter is subtracted from ; the original value of range0 to get the ; new value of the range0 parameter crd_p_20(m)=0.0 crd_p_40(m)=0.0 crd_p_80(m)=0.0 crd_l_20(m)=0.0 crd_l_40(m)=-96.61 crd_l_80(m)=-53.6 crd_c_20(m)=0.0 crd_c_40(m)=-100.26 crd_c_80(m)=0.0 ;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpParms fc(Hz) = 5.31e9 ; RF conversion frequency for this mode frequency(Hz) = 5287500000 ; RF center of video frequency spectrum wavelength(m) = 0.0566983372104019 ; wavelength of the center frequency range0(m) = 8869.1893965 ; meters to first sample bandwidth(Hz) = 40000000 ; pulse bandwidth pulseduration(s) = 1e-05 ; pulse duration sampfreq(Hz) = 90000000 ; real sampling frequency (2 * complex sampfreq) rangeSampleSpacing(m) = 3.33102731111111 ; meters (complex samples) chirpdirection = DN ; options: UP, DN, or U/D transmitmode = 1 ; 1 for ping-pong, 0 for common-xmtr lightspeed = 299792458 ; speed of light in vacuo acqname = SantaMon31-1 ; name of data take acqdate = 109 21:04:11.000 ; day of year, time of mission acqlat = +33 29.8 ; rough latitude of mission acqlon = -118 48.1 ; rough longitude of mission serial = 03033 ; volume serial number on tape acqmode = 0 ; what mode for this datatake? acqstatus = ATI2P ; radar status: test,data,etc acqantenna = Mixed Modes ; antenna configuration acqcrew = TWM DAI DCF George, Mark, Ben ; whom do we blame for this data set? acqnotes = Ship was supposed to have been passing through our swath, but no indication on RTC, also unable to detect eddy feature, but lots of slicks telev(ft) = 0 ; estimated elevation of target lCalFreq(MHz) = 1216.40625 ; L-band caltone frequency cCalFreq(MHz) = 5266.40625 ; C-band caltone frequency pCalFreq(MHz) = 428.5546875 ; P-band caltone frequency calFreq(MHz) = 5266.40625 ; caltone for current band (c) ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpHW hw = /mnt/d01/airops/at36out/at0036.chw ; honeywell data ; info on /mnt/d01/airops/at36out/at0036.chw file hwfields = frame time tprf lat lon alt ve vn vu hdg pitch roll nhwfields = 12 ; number of fields in each record hwrecsize = 96 ; number of bytes in each record nhwrecs = 6395 ; number of records in the file ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpFrame frm = /mnt/d01/airops/at36out/at0036.cfrm ; IGI frame time-tags timestart = 594264.769943 ; GPS time at first frame timestop = 594364.670833913 ; GPS time at last frame timetotal = 99.900890912977 ; duration of data segment timepri = 0.0011892821622716 ; estimate of PRI from time tags badFrames = 0 ; number of mis-ordered frames badTimes = 0 ; number of mis-ordered time tags ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpHWf hwffilterlength = 5 ; length of HW data median filter hwm = /mnt/d01/airops/at36out/at0036.chwm ; median filtered HW data hwf = /mnt/d01/airops/at36out/at0036.chwf ; corrected HW data ; parameters used or added by /u/sartor0/airops/ati/hp/bin/hwProc hwpolyfit = 2 ; order of polynomial fit hwstdevfilter = 3 ; stdev's from avg hwfilterlength = 11 ; smoothing window ; parameters added by /u/sartor0/airops/ati/hp/bin/moxRef mox = /mnt/d01/airops/at36out/at0036.cmox ; INU motion pegged to ref ; reference track: peg(deg) = 33.585146716507744 -118.73941863161346 0 heading(deg) = 31.084082345613972 ; parameters added by /u/sartor0/airops/ati/hp/bin/moxArm mox_ctt = /mnt/d01/airops/at36out/at0036.cmox_ctt; motion data for ctt phase center (no interp). mox_ctb = /mnt/d01/airops/at36out/at0036.cmox_ctb; motion data for ctb phase center (no interp). mox_cta = /mnt/d01/airops/at36out/at0036.cmox_cta; motion data for cta phase center (no interp). mox_ctf = /mnt/d01/airops/at36out/at0036.cmox_ctf; motion data for ctf phase center (no interp). mox_cbt = /mnt/d01/airops/at36out/at0036.cmox_cbt; motion data for cbt phase center (no interp). mox_cbb = /mnt/d01/airops/at36out/at0036.cmox_cbb; motion data for cbb phase center (no interp). mox_cba = /mnt/d01/airops/at36out/at0036.cmox_cba; motion data for cba phase center (no interp). mox_cbf = /mnt/d01/airops/at36out/at0036.cmox_cbf; motion data for cbf phase center (no interp). mox_cat = /mnt/d01/airops/at36out/at0036.cmox_cat; motion data for cat phase center (no interp). mox_cab = /mnt/d01/airops/at36out/at0036.cmox_cab; motion data for cab phase center (no interp). mox_caa = /mnt/d01/airops/at36out/at0036.cmox_caa; motion data for caa phase center (no interp). mox_caf = /mnt/d01/airops/at36out/at0036.cmox_caf; motion data for caf phase center (no interp). mox_cft = /mnt/d01/airops/at36out/at0036.cmox_cft; motion data for cft phase center (no interp). mox_cfb = /mnt/d01/airops/at36out/at0036.cmox_cfb; motion data for cfb phase center (no interp). mox_cfa = /mnt/d01/airops/at36out/at0036.cmox_cfa; motion data for cfa phase center (no interp). mox_cff = /mnt/d01/airops/at36out/at0036.cmox_cff; motion data for cff phase center (no interp). ; parameters added by /u/sartor0/airops/ati/hp/scripts/hpMxStats stf = /mnt/d01/airops/at36out/at0036.cstf ; stats file for motion data ; ; specific command line parameters added for this job ; ch1 = caf ch2 = caa ;=============================================================================== ; parameters added by /u/sartor0/airops/ati/pp/scripts/ppSetup ; pp executables and paths pppath = /u/sartor0/airops/ati/pp ; top-level for pp ppscripts = /u/sartor0/airops/ati/pp/scripts ; source folder for scripts ppbin = /u/sartor0/airops/ati/pp/bin ; folder for pp binaries pp_setup = /u/sartor0/airops/ati/pp/scripts/ppSetup ; pp setup script ps_setup = /u/sartor0/airops/ati/pp/scripts/psSetup ; presum setup script az_setup = /u/sartor0/airops/ati/pp/scripts/azSetup ; azimuth processing setup script if_setup = /u/sartor0/airops/ati/pp/scripts/ifSetup ; interferogram and magfile setup script uw_setup = /u/sartor0/airops/ati/pp/scripts/uwSetup ; phase unwrapping setup script grid_setup = /u/sartor0/airops/ati/pp/scripts/gridSetup ; phase unwrapping setup script par_setup = /u/sartor0/airops/ati/pp/scripts/parSetup ; parameter parsing setup script pp_ati = /u/sartor0/airops/ati/pp/bin/ppAti ; pp binary for ATI ; ATI executables and paths ati_path = /u/sartor0/airops/ati ; top-level for ATI software ati_bin = /u/sartor0/airops/ati/bin ; folder for ATI executables caltone = /u/sartor0/airops/ati/bin/caltone ; caltone estimation executable presum = /u/sartor0/airops/ati/bin/presum ; presum executable azproc = /u/sartor0/airops/ati/bin/azproc ; azimuth compression executable intf = /u/sartor0/airops/ati/bin/intf ; interferogram formation executable mags = /u/sartor0/airops/ati/bin/mags ; mag files formation executable unwrap = /u/sartor0/airops/ati/bin/unwrap ; phase unwrapping executable regrid = /u/sartor0/airops/ati/bin/grid ; regridding incMap = /u/sartor0/airops/ati/bin/incMap ; incidence angle map creation offsets = /u/sartor0/airops/ati/Tools/bin/calib_ampcor ; registration estimator tools = /u/sartor0/airops/ati/Tools/bin ; path to ati utilities rilooks = /u/sartor0/airops/ati/Tools/bin/rilooks ; utility for taking real looks in complex data cpxlooks = /u/sartor0/airops/ati/Tools/bin/cpxlooks ; utility for taking complex looks reallooks = /u/sartor0/airops/ati/Tools/bin/detilt_hgt ; utility for taking real looks in real data cpx2mag = /u/sartor0/airops/ati/Tools/bin/cpx2mag ; utility for converting complex*8 to real*4 mags cpx2phs = /u/sartor0/airops/ati/Tools/bin/cpx2phs ; utility for converting complex*8 to real*4 phase byteSplit = /u/sartor0/airops/ati/Tools/bin/byteSplit ; utility for fast extraction of raw data ; files and paths ppout = /mnt/d01/airops/at36out ; where to write the output ppp = /mnt/d01/airops/at36out/at0036.cppp ; pre-processing parameters (this file) par = /mnt/d01/airops/at36out/at0036.caf_caa_par ; nicely-formatted essential parameters file. ; interferometric channels ch0 = caf_caa ; reference ch1 = caf ; first channel ch2 = caa ; second channel lever_caf = 1.51 0.4 -0.395 ; phase center for caf channel lever_caa = 0.5509 0.6757 -0.0882 ; phase center for caa channel baseline_caf_caa = 0.9591 -0.2757 -0.3068 ; vector: lever_caf - lever_caa ; ping-pong information transmitBaseline = pp ; pp/ct (ping-pong/common-transmitter) tprfFactor = 2 ; tprf corresponds to 1/2 channels processBaseline = 1 ; 0/1/2 for baseline factor caf_ndataframes = 42000 ; nRecs in caf rsd file caa_ndataframes = 42000 ; nRecs in caf rsd file caf_frameOffset = 1 ; lookup into frametag caa_frameOffset = 1 ; lookup into frametag ; ppAti options ppOs = 1.2 ; oversampling factor ppnRefSkip = 0 ; number of points between each ref point ppnRefAvg = 1 ; number of points to average for ref moxTag = mox ; suffix for mox files mocTag = moc ; suffix for moc files leverTag = lever ; suffix for leverarm keywords lengthTag = length ; suffix for antenna length keywords ppdt(s) = 1 ; (debugging) time delay between updates ppds(m) = 1 ; spacing (meters) for reference track ; output products: number of looks azonl = 1 ; 'target' total number of looks for output imagery ; ; parameters added by ppAti ; ppDs(m) = 0.641171 ; motion record spacing ppS0(m) = -23.1215 ; starting position ppSS(m) = 21573.8 ; along track length ppnMocRecs = 33648 ; number of records caf_caa_moc = /mnt/d01/airops/at36out/at0036.cmoc_caf_caa ; mocomp file for ref caf_moc = /mnt/d01/airops/at36out/at0036.cmoc_caf ; mocomp file for ch1 caa_moc = /mnt/d01/airops/at36out/at0036.cmoc_caa ; mocomp file for ch2 ; ; parameters added by /u/sartor0/airops/ati/pp/scripts/psSetup ; ; data files caf = /mnt/d01/airops/at36out/at0036.caf ; data file for first channel caa = /mnt/d01/airops/at36out/at0036.caa ; data file for second channel caf_nsamples = 6144 ; caf data file record length caa_nsamples = 6144 ; caa data file record length ; presum options psRfl = 4 ; presum relative filter length psfPrecision = 1024 ; presum filter precision psfWindow = Hanning ; presum filter window psfBandwidth = 1 ; presum filter fractional bandwidth psbRes(Hz) = 1 ; presum buffer update resolution psElevRef(m) = 0 ; elevation reference for presummer caf_psMocRec0 = 0 ; presum start mocrec caa_psMocRec0 = 0 ; presum start mocrec caf_psOut = /mnt/d01/airops/at36out/at0036.caf-ps ; presum output file for caf caa_psOut = /mnt/d01/airops/at36out/at0036.caa-ps ; presum output file for caa ; ; Parameters associated with caltone: ; ppFile = /mnt/d01/airops/at36out/at0036.cppp ; caltone parameter file caf_nSamples = 6144 caf_caltone = /mnt/d01/airops/at36out/at0036.caf_caltone caf_calnAvgAz = 4 caf_calBin = 3968 caf_calPhase(rad) = 1.33978 caf_calMag = 39.894 ; ; parameters added by presum ; caf_psnmocrecs = 33648 ; number of moc recs presummed caf_psnsamples = 2476 ; ; parameters added by /u/sartor0/airops/ati/pp/scripts/azSetup ; offset_log = /mnt/d01/airops/at36out/at0036.azOffsetsLog_caf_caa ; log of registration estimates offset_data = /mnt/d01/airops/at36out/at0036.azOffsets_caf_caa ; registration estimates data ; azimuth processing options caf_azout = /mnt/d01/airops/at36out/at0036.caf-az ; azimuth processed file for caf caa_azout = /mnt/d01/airops/at36out/at0036.caa-az ; azimuth processed file for caa caf_azSquint = /mnt/d01/airops/at36out/at0036.caf-az-squint ; squint used to azimuth-compress caf caa_azSquint = /mnt/d01/airops/at36out/at0036.caa-az-squint ; squint used to azimuth-compress caa caf_azMocAvg = /mnt/d01/airops/at36out/at0036.caf-az-mocAvg ; mocAvg used to azimuth-compress caf caa_azMocAvg = /mnt/d01/airops/at36out/at0036.caa-az-mocAvg ; mocAvg used to azimuth-compress caa azPixelRatio = 6.49403067027187 ; ratio of one-look pixel dimensions azonlRa = 1 ; range looks for output magnitude image azonlAz = 6 ; azimuth looks for output magnitude image imageLooks = 6 ; actual number of looks taken for imagery ; ; parameters added by azproc for ch caf ; caf_refLen = 1024 ; az reference length caf_azblock = 2048 ; length of azimuth proc. patch caf_azdata = 1024 ; length of azimuth output patch caf_aznsamples = 2476 ; samples in az file caf_azsample0 = 0 ; first azimuth sample caf_aznmocrecs = 33648 ; number of pulses in az file caf_azmocrec0 = 0 ; first pulse in az file ; ; Parameters associated with caltone: ; ppFile = /mnt/d01/airops/at36out/at0036.cppp ; caltone parameter file caa_nSamples = 6144 caa_caltone = /mnt/d01/airops/at36out/at0036.caa_caltone caa_calnAvgAz = 4 caa_calBin = 3968 caa_calPhase(rad) = 1.25205 caa_calMag = 42.7887 ; ; parameters added by presum ; caa_psnmocrecs = 33648 ; number of moc recs presummed caa_psnsamples = 2476 ; ; parameters added by azproc for ch caa ; caa_refLen = 1024 ; az reference length caa_azblock = 2048 ; length of azimuth proc. patch caa_azdata = 1024 ; length of azimuth output patch caa_aznsamples = 2476 ; samples in az file caa_azsample0 = 0 ; first azimuth sample caa_aznmocrecs = 33648 ; number of pulses in az file caa_azmocrec0 = 0 ; first pulse in az file ; ; parameters added by /u/sartor0/airops/ati/pp/scripts/ifSetup ; ; azimuth processing options caf_caa_intf = /mnt/d01/airops/at36out/at0036.caf_caa_intf ; interferogram betwenn caf and caa caf_caa_azmag = /mnt/d01/airops/at36out/at0036.caf_caa_azmag ; complex (caf,caa) mag file ifonlRa = 1 ; range looks for output interferogram ifonlAz = 6 ; azimuth looks for output interferogram ; ; parameters added by /u/sartor0/airops/ati/pp/scripts/uwSetup ; ; unwrapping processing options gwf = /mnt/d01/airops/at36out/at0036.caf_caa_intf.gwf ; parmfile for gwf unwrapper uwAvgRa = 3 ; looks in range for unwrapping uwAvgAz = 15.5856736086525 ; looks in azimuth for unwrapping uwSm = /mnt/d01/airops/at36out/at0036.caf_caa-uwSm ; Filtered Interferogram File uwUnw = /mnt/d01/airops/at36out/at0036.caf_caa-uwUnw ; Unwrapped Phase File uwWrp = /mnt/d01/airops/at36out/at0036.caf_caa-uwWrp ; Wrapped Phase File uwFlg = /mnt/d01/airops/at36out/at0036.caf_caa-uwFlg ; Flag File uwSlp = /mnt/d01/airops/at36out/at0036.caf_caa-uwSlp ; Phase Gradient File uwGcc = /mnt/d01/airops/at36out/at0036.caf_caa-uwGcc ; Gradient Corrected Correlation File uwCc = /mnt/d01/airops/at36out/at0036.caf_caa-uwCc ; Standard Correlation File uwPhs = /mnt/d01/airops/at36out/at0036.caf_caa-uwPhs ; Phase Sigma File uwScc = /mnt/d01/airops/at36out/at0036.caf_caa-uwScc ; Phase Sigma Correlation File ; ; parameters added by /u/sartor0/airops/ati/pp/scripts/gridSetup ; ; re-gridding processing options postS(m) = 10 ; along-track post spacing postC(m) = 10 ; cross-track post spacing grid_intf = /mnt/d01/airops/at36out/at0036.caf_caa-uwWrp-sc10x10 ; gridded interferogram output filename grid_corr = /mnt/d01/airops/at36out/at0036.caf_caa-uwScc-sc10x10 ; gridded correlation output filename grid_inc = /mnt/d01/airops/at36out/at0036.caf_caa-uwWrp-sc10x10-inc ; gridded incidence angles output filename ; ; parameters added by grid ; grid_sMin = -11439; min S in regridded output grid_sMax = 9701; max S in regridded output grid_cMin = 3526; min C in regridded output grid_cMax = 15036; max C in regridded output grid_pulse_window = 18 grid_sample_window = 7 grid_distance_threshhold = 14.1421 grid_nsamples = 1152; regridded samples grid_nrecords = 2115; regridded records grid_corner_1 = 33.51317553 -118.8352694 -0.01514709834; lat(d) lon(d) alt(m) grid_corner_2 = 33.56662574 -118.9414906 -0.09434580524; lat(d) lon(d) alt(m) grid_corner_3 = 33.67646271 -118.7177366 0.008915619925; lat(d) lon(d) alt(m) grid_corner_4 = 33.73001202 -118.8240861 0.008402784355; lat(d) lon(d) alt(m)