NEW HEADER: RECORD LENGTH IN BYTES = 2466 NUMBER OF HEADER RECORDS = 5 NUMBER OF SAMPLES PER RECORD = 1233 NUMBER OF LINES IN IMAGE = 3062 NUMBER OF BYTES PER SAMPLE = 2 JPL AIRCRAFT SAR PROCESSOR VERSION 6.10 DATA TYPE = INTEGER*2 RANGE PROJECTION = GROUND RANGE PIXEL SPACING (METERS) = 10.0000 AZIMUTH PIXEL SPACING (METERS) = 10.0000 BYTE OFFSET OF OLD HEADER = 0 BYTE OFFSET OF USER HEADER = 0 BYTE OFFSET OF FIRST DATA RECORD = 12330 BYTE OFFSET OF PARAMETER HEADER = 2466 LINE FORMAT OF DATA = RANGE BYTE OFFSET OF CALIBRATION HEADER = 0 BYTE OFFSET OF DEM HEADER = 9864 PARAMETER HEADER: FENI 227-1 (B) NAME OF HEADER PARAMETER SITE NAME Feni-227-1 LATITUDE OF SITE (DEGREES) -3.9417 LONGITUDE OF SITE (DEGREES) 153.6550 IMAGE TITLE FENI 227-1 (B) HDDT ID 96061 FREQUENCY C POLARIZATION VV CCT TYPE TS CCT ID 365 ARCHIVAL FLAG 0 TRANSFER START FRAMECOUNT 13198864 PROCESSOR START FRAMECOUNT 13198864 LATITUDE AT START OF SCENE (DEGREES) -3.9428 LONGITUDE AT START OF SCENE (DEGREES) 153.6921 LATITUDE AT END OF SCENE (DEGREES) -4.2165 LONGITUDE AT END OF SCENE (DEGREES) 153.4008 APPROXIMATE STARTING HDDT FOOTAGE 83800 DATE OF ACQUISITION (GMT) 18-NOV-96 TIME OF ACQUISITION: GMT DAY 323 TIME OF ACQUISITION: SECONDS IN DAY 8617.0 RECORD WINDOW DURATION (MICROSECONDS) 65 FREQUENCIES COLLECTED LC DIGITAL DELAY (MICROSECONDS) 92.0 CHIRP DELAY (MICROSECONDS) 32.5 PROCESSOR DELAY (RAW SAMPLES) 0 PRF AT START OF TRANSFER (HZ) 836.8 SAMPLING RATE (MHZ) 90.00 CENTER FREQUENCY AT VIDEO (MHZ) 22.50 CHIRP BANDWIDTH (MHZ) 40.00 TYPE OF CHIRP USED (ANALOG OR DIGITAL) DIGITAL PULSE LENGTH (MICROSECONDS) 10.00 PROCESSOR WAVELENGTH (METERS) 0.05670 BAROMETRIC ALTITUDE (METERS) 7927.0 RADAR ALTITUDE (METERS) 8376.1 ALTITUDE USED IN PROCESSOR (METERS) 8376.1 ELEVATION OF INVESTIGATOR SITE (METERS) 152 AIRCRAFT TRACK ANGLE (DEGREES) -133.1 AIRCRAFT YAW ANGLE (DEGREES) -0.8 AIRCRAFT PITCH ANGLE (DEGREES) 1.2 AIRCRAFT ROLL ANGLE (DEGREES) 0.3 PROCESSOR YAW ANGLE USED (DEGREES) 0.0 PROCESSOR PITCH ANGLE USED (DEGREES) 0.0 PROCESSOR ROLL ANGLE USED (DEGREES) 0.0 NOMINAL PRF RATIO (HZ/KNOT) 1.000 NOMINAL PRF RATIO (1/METERS) 3.888 PRF RATIO CORRECTION FACTOR USED 1.0000 RANGE FFT SIZE 8192 AZIMUTH FFT SIZE 4096 FRAME SIZE (RANGE LINES) 2208 NUMBER OF FRAMES PROCESSED 78 RANGE ALIGNMENT DELAY USED,HH (MICROSEC) 0.0000 RANGE ALIGNMENT DELAY USED,HV (MICROSEC) 0.0000 RANGE ALIGNMENT DELAY USED,VH (MICROSEC) 0.0000 RANGE ALIGNMENT DELAY USED,VV (MICROSEC) -0.0173 NEAR SLANT RANGE (METERS) 8863.36 FAR SLANT RANGE (METERS) 17387.46 NEAR LOOK ANGLE (DEGREES) 19.1 FAR LOOK ANGLE (DEGEES) 61.2 NUMBER OF LOOKS PROCESSED IN AZIMUTH 36 NUMBER OF LOOKS PROCESSED IN RANGE 1 RANGE WEIGHTING USED COS2 RANGE WEIGHTING COEFFICIENT 0.100 AZIMUTH WEIGHTING USED NONE AZIMUTH WEIGHTING COEFFICIENT 1.000 PERCENT OF PRF BANDWIDTH PROCESSED 21.4 DESKEW FLAG (1=DESKEWED, 2=NOT DESKEWED) 1 SLANT RANGE SAMPLE SPACING (METERS) 3.33 NOMINAL SLANT RANGE RESOLUTION (METERS) 5.5 AZIMUTH SAMPLE SPACING (METERS) 9.36 NOMINAL AZIMUTH RESOLUTION (METERS) 43.2 NUMBER OF INTERPOLATION PNTS USED IN RMC 8 AZIMUTH REFERENCE SIZE/LOOK, NEAR RANGE 0 AZIMUTH REFERENCE SIZE/LOOK, FAR RANGE 0 IMAGE CENTER LATITUDE (DEGREES) -4.1272 IMAGE CENTER LONGITUDE (DEGREES) 153.5908 CALTONE VIDEO FREQUENCY 43.5938 CALTONE POWER MEASURED, DB, HH 89.1 CALTONE POWER MEASURED, DB, HV 90.7 CALTONE POWER MEASURED, DB, VH 89.1 CALTONE POWER MEASURED, DB, VV 90.7 CALIBRATION FACTOR APPLIED, DB, HH 0 CALIBRATION FACTOR APPLIED, DB, HV 0 CALIBRATION FACTOR APPLIED, DB, VH 0 CALIBRATION FACTOR APPLIED, DB, VV 0 MEASURED AND CORRECTED HV/VH POWER RATIO 0.000 MEASURED AND CORRECTED HV/VH PHASE (DEG) 0.0 CALTONE PHASE MEASURED, DEG, HH -13.6 CALTONE PHASE MEASURED, DEG, HV 71.6 CALTONE PHASE MEASURED, DEG, VH -13.6 CALTONE PHASE MEASURED, DEG, VV 71.6 GENERAL SCALE FACTOR 0.0 GPS ALTITUDE, M 8400.8 LATITUDE OF PEG POINT -4.02 LONGITUDE OF PEG POINT 153.57 HEADING AT PEG POINT -133.09 P-BAND RFI FILTER APPLIED FLAG NO P-BAND RFI FILTER ALGORITHM DEM HEADER: NAME OF HEADER DEM ELLIPSOID MODEL = WGS84 PLANIMETRIC REFERENCE SYSTEM = UTM UTM ZONE CODE = TBD X-DIRECTION POST SPACING (M) = 10.0 Y-DIRECTION POST SPACING (M) = 10.0 ELEVATION INCREMENT (M) = 0.1 ELEVATION OFFSET (M) = 164.2 LATITUDE OF CORNER 1 = -3.94 LONGITUDE OF CORNER 1 = 153.69 LATITUDE OF CORNER 2 = -4.02 LONGITUDE OF CORNER 2 = 153.77 LATITUDE OF CORNER 3 = -4.21 LONGITUDE OF CORNER 3 = 153.57 LATITUDE OF CORNER 4 = -4.13 LONGITUDE OF CORNER 4 = 153.49 LATITUDE OF PEG POINT = -4.02 LONGITUDE OF PEG POINT = 153.57 HEADING AT PEG POINT (DEGREES) = -133.1 ALONG-TRACK OFFSET S0 (M) = -15219.4 CROSS-TRACK OFFSET C0 (M) = 2898.3